SKU: BY-PL-001 Category:
General Details


-Balance tank with level control
-Centrifugal feed pump
-Flow control (mechanical flow controller)
-Tubular heat exchange with preheating/regenerative-sterilising and cooling sections. The heat exchanger tubes are made of stainless steel AISI 316 and the frame of 304. The gaskets are available in frame of 304. The gaskets are available in Nitrile, Viton, Glued or Clip-on designs.
-Holding tube
-Hot water set composing of Hot water set including tubular heat exchange, pump, steam valve, steam trap, expansion vessel, etc.
-Control Panel features relay/regulator control, push buttons, recorder, motor starters and solenoid valves.
-Automatic pasteurisation temp. control
-Automatic flow diversion, interlocked with temperature failure
-Registration of pasteurisation temperature
-Monitoring of position of flow diversion valve
-CIP by internal circulation over balance tank


1. Pre-Heat
2. Heat-up
3. Cooling
4. CIP (Clean in place) before and after operation.

Operating Process

1. The process begins from balance tank
2. Product from balance tank enters the sterilisation system
3. The steriliser is designed to sterilise puree/pulp concentrates and fibrous liquids to ensure a long product lifespan. The stages of sterlisation are pre-heat, heat-up (up to 140 degrees Celsius) and cooling.
4. After the sterilization process has finished completely, the product will enter the cooling system so that the product temperature is lowered to 45-65C. Once it is at this temperature, it can then enter the filling machine. It is possible to fill PVC materials.
5. If product does not reach desired temperature, the product circulates back into the balance tank for further heating.

Special Advantages

1. Available for liquid and sticky products to meet various requirements
for example sauces, mayonnaise, custard, cream, milk, juice, juice drinks, etc
2. Appropriate for SMEs and large enterprises.
3. We have a professional team who fit the machine to the available space.
4. There is CIP (Clean in place) system operating by the control cabinet.
5. The control cabinet easy to use.
6. The machine is covered by a 1 year guarantee

Technical Info

Name : Tubular Steriliser (Complete set)
Model : BY-PL-001
Capacity : 2-4 tons/hr
Steriliser size(m) : 2.0(w)x3.0(L)x2.5(H)
Sterilising Temperature : 100C -140 C
Cooling Temperature : 45-65 C
System : Balance tank+Steriliser

Order Enquiry

Contact us about this product

  • 1 + 17 =