BY-PM-003

SKU: BY-PM-003 Category:
General Details

Design

-Includes Hot water tank (heat source)
-Includes Powder Mixer
-Includes 2 stock tanks
-Balance tank with level control
-Centrifugal feed pump
-Flow control (mechanical flow controller)
-Tubular heat exchange with preheating/regenerative-pasteurizing and cooling sections. The heat
exchanger tubes are made of stainless steel AISI 316 and the frame of 304. The gaskets are
available in frame of 304. The gaskets are available in Nitrile, Viton, EPDM, Glued or Clip-on designs.
-Holding tube
-Hot water set including P.H.E, pump, steam valve, steam trap, expansion vessel, etc.
-Control Panel including: relay/regulator control, push buttons, recorder, motor starters and
solenoid valves.
-Automatic pasteurisation temp. control
-Automatic flow diversion, interlocked with temperature failure
-Registration of pasteurisation temperature
-Monitoring of position of flow diversion valve
-CIP by internal circulation over balance tank

Processing

1. Powder mixer blends ingredients.
2. Stock tank stores product for next step
3. ingredients are pasteurised by pre-heating, increased heating, and cooling.
4. CIP (Clean in place) before and after operation.

Operating Process

1. The process begins from Mixing ingredients at mixing area.
2. Product enters storage tank then is sent to balance tank for product warming.
3. The product enters the pasteurising process which consists of the pre-heat and heat-up stages.
**We developed a high technology hot water tank which is the heat source to support the high-temperature pasteurising system. This means we no longer need a large boiler to heat the product. The long term advantages are energy saving, investment reduction and safety.
4. After the pasteurising process, the product will enterto Cooling system
to decrease product temperature which passed completely from heat-up process
(pasteurizing) before entry to filing machine. Enable for filling to PVC materials.
5. In case, if the product temperature lower standard quality, the system will not allow
entry to the next step but it will re-process to balance tank.

Special Advantages

1. Available for liquid and sticky products to meet various requirements
for example sauces, mayonnaise, custard, cream, milk, juice, juice drinks, etc
2. Appropriate for SMEs and large enterprises.
3. We have a professional design space service team to give counsel to you.
4. There is CIP (Clean in place) system operating by the control cabinet.
5. The control cabinet easy to use.
6. The machine is covered by a 1 year guarantee

Technical Info

Name : Tubular Pasteuriser (Complete set)
Model : BY-PM-003
Capacity : 1,000L/Hr
Mixer size(m) : 1.5(w)x2.3(L)x2.5(H)
Pasteurizer size(m) : 1.5(w)x3.0(L)x2.5(H)
Heat-up (Temperature) : 80-95 C
Cool down(Temperature) : 45-65 C
System : Mixer+Stock tank(500L)+Balance tank+Pasteuriser+Cooler

Order Enquiry

Contact us about this product

  • 5 + 77 =
Documents